Default
  1. All Products
  2. Galv through bolt KDK-F-8-30/95 M8 x 80

Galv through bolt KDK-F-8-30/95 M8 x 80

https://paradigme.odoo.com/web/image/product.template/8730/image_1920?unique=0818cf9

ETA Approved through bolt for use in non-cracked concrete. Has a clamping thickness of 15mm, requires a drill hole depth of 65mm, and a drill hole diameter of Ø8mm. Has a thread of M8 x 40

£ 0.76 0.76 GBP £ 0.76

£ 0.76

Not Available For Sale

    This combination does not exist.

    Contact Us

    Terms and Conditions
    30-day money-back guarantee
    Shipping: 2-3 Business Days

    Top Features
    • With assessment document (ETA) the hot dipped galvanized steel version is covered for external use with variable working life depending on environment and corrosion conditions.
    • The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
    • If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
    • Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
    • Simple assembly due to few taps and minimal slippage.

    The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The bolt anchor is made of hot-dipped steel and is suitable for railings, handrails or consoles.
    Advantages
    • The standard anchorage depth achieves the maximum load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
    • The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
    • The first bolt anchor with variable working life covers the usage of bolt anchors in wet conditions and outdoor areas.
    • The long thread balances component tolerances and stand-off installations, and thus increases flexibility.
    • Fewer hammer blows and the minimal torque slippage allow for a noticeably simpler assembly.
    • The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture.

    Documentation

    Load Table: 
    Technical Data Sheet 1: 
    Technical Data Sheet 2: 
    ETA Approval 1: 
    ETA Approval 2: 
    ETA Approval 3: